About my blog

Based on novel robot vision/image recognition algorithms, it is possible to reconstruct a 3D model with a simple webcam in real-time. The AR drone, equipped with several cameras seems to be a perfect match to establish a 3D scanning system for large objects, such as cars or buildings. (Experts: Ronald Poelman&Oytun Akman)

Categories

Archive

Disclaimer

De meningen ge-uit door medewerkers en studenten van de TU Delft en de commentaren die zijn gegeven reflecteren niet perse de mening(en) van de TU Delft. De TU Delft is dan ook niet verantwoordelijk voor de inhoud van hetgeen op de TU Delft weblogs zichtbaar is. Wel vindt de TU Delft het belangrijk - en ook waarde toevoegend - dat medewerkers en studenten op deze, door de TU Delft gefaciliteerde, omgeving hun mening kunnen geven.

Future recommendations

In the last 4 weeks we did some investigation on software
and the ARdrone. Because we didn’t had a lot of time to do this research we
were not able to come up with a completely working system for 3D scanning. But
we were able to create an idea how this 3d project could be improved.

We wanted to improve the software so that the software is
able to run completely by itself because now we had only proven the concept by
running it step by step. Also the software can be improved so that the flight
path of the drone can be preprogrammed. At the moment the drone could only be
controlled by hand. A second point of improvement is the implementation of an
extra software package which is able to filter the sharp pictures so that the models
which come out of the pictures/videos, will have an higher surface quality.  Also should it be nice to have a program
which is faster in converting the pictures/videos into a point cloud.  For example a PTAM based program.

The drone can be improved in several ways.  First of all we experienced that de ARdrone was
to light to fly outside. With the least amount of wind the drone became
unstable. That why we recommend to use another more heavy and stable drone. Which
is also capable of lifting heavier cameras and other equipment.  For the camera we would recommend to use a
higher quality camera, and if possible on with two lenses because than a 3d
picture is build up in just seconds.  Also we would recommend stabilizing the camera
using gyroscopes.  This will result in a
much better and faster 3d model.  Also a GPS
and a 3G receiver should be nice to have an accurate position and a larger range.
This is needed when the programming of the fight path is implemented.

 

These are about all the recommendations we came up with. We
hope you enjoyed our blog. And maybe it gave you some inspirations for your own
projects.

 

Be Sociable, Share!

Leave a Reply

© 2011 TU Delft